84" - 95" Heavy-Duty Series E or A Aluminum Decking/Shoring Beam

84-Inch to 95-Inch Heavy-Duty E or A Aluminum Deck/Shoring Beam

For a mover or a trucker or just about anyone transporting cargo, there's nothing worse than arriving at your destination and finding out that your cargo had been damaged during the move. To help prevent that from happening, Kinedyne has our Heavy-Duty Series E or A Aluminum Decking/Shoring Beam ready and waiting for you.

Adjustable from 84.6 inches to 95 inches, this Beam is built for strength for whatever job you need it to effectively accomplish. If used as a Shoring Beam to keep your cargo in place and separated from each other, it has the strength necessary to easily handle the heavy-duty items with a shoring working load limit of 2,500 Lbs. / 1,135 Kgs. If used as a Decking Beam to evenly stack your loads and save yourself some space in the back of your trailer, it has the durability needed to hold them up securely with a decking working load limit of 3,000 Lbs. / 1,360 Kgs.

Just when you thought it couldn't get any better, our Heavy-Duty Series E or A Aluminum Decking/Shoring Beam is equipped with our convenient KwikLatch Release Tab that helps make disengaging the Beam much quicker and easier. Located on the sides of the hardened steel head assembly, our KwikLatch is less prone to damage compared to top-mounted release tabs and is easier to use even while wearing gloves.

84" - 95" Heavy-Duty Series E or A Aluminum Decking/Shoring Beam – FE8000-1 Quick Specs:

• For Trailer Size (Wide): 96 Inch Wide Trailers
• Decking Working Load Limit: 3,000 Lbs. / 1,360 Kgs.
• Shoring Working Load Limit: 2,500 Lbs. / 1,135 Kgs.
• Series Type: Series E or A
• Width: 2.59 Inches
• Height: 3.77 Inches
• Minimum Length: 84.6 Inches
• Maximum Length: 95 Inches
• Weight: 21.5 Lbs. / 9.8 Kgs.
• Beam Head Assembly Type: Kinedyne 80007 KwikLatch Release Head Assembly