3" by 30' Chain Anchor Winch Strap

3-Inch x 30-Foot Chain Anchor Winch Strap

With a working load limit of 5,400 Lbs. / 2,450 Kgs., Kinedyne's 3-inch x 30-foot Chain Anchor Winch Strap was quality engineered under direct Kinedyne control to exceed your cargo securement needs. We've designed our Chain Anchor Winch Strap with the kind of webbing and hardware necessary to provide the strength and durability demanded in heavy-duty tie down requirements.

The Kinedyne gold with black edge 3084F webbing stands out among others for its quality. When it comes to tying down your heavy-duty load, you don't really want your straps to stretch. This may lead to slack, and the less taut your strap is, the less secure your cargo will be. Instead, our polyester webbing can be tensioned by a winch with minimum stretch.

Our sturdy heat-treated carbon steel Grade 43 Chain Anchor is built to resist heavy-abrasive conditions near the anchor point, so you don't need to worry about any damage being done to either the vehicle or the chains. With its 3/8-inch gold dichromate grab hook, it can latch onto side rails, D-rings, stake pockets, other chains, and other types of anchor points, adding even more strength to your tie down job.

All Kinedyne Winch Straps are labeled with their working load limit on their tags and stenciled on the straps in accordance to WSTDA, CVSA, DOT regulations, CHP, and North American Cargo Securement standards. The working load limit of the 3" x 30' Chain Anchor Winch Strap is 5,400 Lbs. / 2,450 Kgs.

3" by 30' Chain Anchor Winch Strap – 323040 Quick Specs:

• Working Load Limit: 5,400 Lbs. / 2,450 Kgs.
• Width: 3 Inches
• Length: 30 Feet
• Weight: 6.20 Lbs. / 2.8 Kgs.
• Webbing: Standard Kinedyne Gold with Black Edge 3084F Webbing
• End Fitting: Kinedyne 3705-5 Chain Anchor – 18 Inches