Kinedyne 3" x 30' Delta Winch Strap

3" by 30' Delta Winch Strap

Product Code:

323025

UPC Code:

52474008273

Have Questions?

Fill out the form below

The Kinedyne 3" x 30' Delta Winch Strap is manufactured with a 5,400 Lbs. / 2,450 Kgs. working load limit to provide you the strength you need for your tie down jobs. Our durable webbing and hardware work together to handle nearly any heavy-duty cargo securement job.

3-Inch x 30-Foot Delta Winch Strap

Are you looking for 30 feet of strong, webbing that can handle a working load limit of 5,400 Lbs. / 2,450 Kgs. for your heavy-duty tie down jobs? Well then, you've found the ideal solution with our 3" x 30' Delta Winch Strap. Our Delta Winch Strap can be secured in a winch that's been attached to the base of your trailer or platform to be used to properly tighten down your load.

Need industrial strength? Need durability? Need a reliable strap that can take back control over your cargo? The Kinedyne gold with black edge 3084F polyester webbing provides all of that and more for your tie down requirements. Manufactured under direct Kinedyne control with a tight weave, our webbing offers 30 feet of reliable support.

The heat-treated carbon steel Kinedyne 1025 Delta Ring can be attached to nearly any hook on your flatbed or other vehicle. It's been coated in a zinc plated finish in order to protect it against corrosion, so our Delta Ring retains its strength while securing your load time and time again.

Kinedyne Winch Straps are labeled with the manufacturer's name and logo and the working load limit on the tags and stenciled on the straps every 30 inches in accordance to WSTDA, CVSA, North American Cargo Securement, CHP standards, and DOT regulations.

3" by 30' Delta Winch Strap – 323025 Quick Specs:

Working Load Limit: 5,400 Lbs. / 2,450 Kgs.
Width: 3 Inches
Length: 30 Feet
Weight: 4.12 Lbs. / 1.9 Kgs.
Webbing: Standard Kinedyne Gold with Black Edge 3084F Webbing
End Fitting: Kinedyne 1025 Delta Ring

Specifications

Breaking Strength - Assembly (lbs):	16200
End Fitting Material:	Heat Treated Carbon Steel
Breaking Strength - End Fittings (kgs):	8165
Breaking Strength - End Fittings (lbs):	18000
End Fitting Finish:	Zinc Plated
Country of Origin:	Canada/USA
Family:	Kinedyne Gold with Black Edge
Breaking Strength - Webbing (kgs):	8165
Breaking Strength - Webbing (lbs):	18000
Breaking Strength - Assembly (kgs):	7348
End Fitting Color:	Gold Dicromate
Color:	Kinedyne Gold with Black Edges
PROPOSITION 65:	No
Rating Tag:	Tyvek Tag marked with Manufacturers Name, Working Load Limit in Pounds and Kilograms in accordance to North American Regulations
Kinedyne K-Force Abrasion Coating:	False
Kinedyne Rhino Abrasion Coating:	False
Length (feet):	30
Specification Met:	WSTDA (web sling tie down association)
Sew Pattern:	Engineered to match webbing and hardware
Shipping Days:	3-5
VMRS Cargo Restraints:	055-012-014
Note for Breaking Strength (added as a warning 1):	notes-all-winch-strap-assembly-rating
Note for Breaking Strength (added as a warning 2):	notes-all-winch-strap-assembly-rating
Note for Breaking Strength (added as a warning 3):	notes-all-winch-strap-assembly-rating
Type of End Fitting:	Kinedyne 1025 Delta Ring
Warning Tag:	Trilingual (English, French and Spanish)
Webbing:	Kinedyne Gold with Black Edge 3084F Webbing
Webbing Material:	Polyester
Working Load Limit - Assembly (kgs):	2449
Webbing Strength (WSTDA) Indicator Line:	WSTDA (web sling tie down association) Capacity Indicator Line - 2 red line which represents 6000 Lbs. per inch across webbing
Working Load Limit - Assembly (lbs):	5400
Working Load Limit - End Fittings (kgs):	2722
Working Load Limit - End Fittings (lbs):	6000
Weight (kgs):	2
UPC Code:	52474008273
Weight (lbs):	4.1
Stencil Working Load Limit:	Stenciled with Manufacturers Name, Working Load Limit in Pounds and Kilograms in accordance to North American Regulations, every 30 inches
Working Load Limit - Webbing (kgs):	2722
Working Load Limit - Webbing (lbs):	6000
Width (inches):	3

Packaging

Skid - GTIN:	20052474008277
Skid - Standard Pack Quantity:	12
Skid - Unit Quantity:	120
Standard Pack - GTIN:	10052474008270
Standard Pack - Unit Quantity:	10
Unit Packaging:	Individually rolled and banded

Notices & Warnings

Warning English:	WARNING: Only trained, knowledgeable personnel should use tie-down straps. It is the operator’s responsibility to use appropriate type and number of straps for the load being secured. Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn or damaged shall not be used and shall be replaced immediately. All strap assemblies shall be inspected prior to each use. The use of “Cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne approved device, can cause serious injury to the user and/or bystander. Webbing straps are rated for use in a temperature range from +194 degrees F (+90°C) to -40 degrees F (-40°C). Straps should be stored out of direct sun and away from damaging chemicals when not in use. Ensure load is stable before tightening or releasing tension in a strap assembly.
Warning French:	AVERTISSEMENT : Seulement un personnel qualifié et instruit devrait se servir des courroies d’arrimage. Il est de la responsabilité de l’opérateur d’assurer l’utilisation du bon nombre et genre de courroie d’arrimage pour le type de cargaison étant sécurisée. Les courroies et sangles doivent être protégées lorsqu’elles sont utilisées sur des objets abrasifs ou coupants. Les courroies coupées, usées ou endommagées ne doivent pas être utilisées et doivent être remplacées immédiatement. Tout ensemble de courroie doit être inspecté avant chaque utilisation. L’utilisation d’une rallonge ou autre moyen d’accroître l’effet de levier d’une poignée à boucle à cliquet ou d’un treuil, autre qu’un outil approuvé par Kinedyne, peut causer des blessures graves à l’utilisateur ou un passant. Les courroies tissées sont calibrées pour des températures allant de + 194 degrés F (+90°C) à -40 degrés F (-40°C). Les sangles devraient être rangée hors du soleil et loin des produits chimiques nuisibles lorsqu’elles ne sont pas en utilisation.Assurez-vous que la cargaison est stable avant d’arrimer ou de relâcher la tension d’une courroie d’arrimage.
Warning Spanish:	ADVERTENCIA: Solo el personal entrenado y bien informado debe usar correas de amarre. Es responsabilidad del operador utilizar un tipo y numero de correas apropiados para la carga que se asegura. Las correas deben protegerse cuando se utilizan sobre objetos ásperos o cortantes. Las correas cortadas, desgastadas o dañadas no deben ser utilizadas y deben sustituirse inmediatamente.Todos los ensambles de correa deben inspeccionarse antes de ser utilizados. El uso de dispositivos no aprobados por Kinedyne, tales como alguna barra de extensión o alguna otra herramienta para aumentar el apalancamiento en un trinquete omalacate, puede causar serios daños al operario o a cualquier persona alrededor. Las correas están diseñadas para ser utilizadas dentro de un rango de temperatura que va de los +194°F (+90°C) hasta -40°F (-40°C). Los conjuntos deben almacenarse fuera del sol directo y lejos de productos químicos dañinos cuando no esten en uso.Asegúrese de que la carga sea estable antes de apretar o liberar la tensión en un conjunto de correa.

Click on thumbnails to compare, click and drag images to reorder

3" by 30' Delta Winch Strap

Fill out the form below

3-Inch x 30-Foot Delta Winch Strap

3" by 30' Delta Winch Strap – 323025 Quick Specs: