4" by 30' K-FORCE Wire Hook Winch Strap

4-Inch x 30-Foot K-FORCE Wire Hook Winch Strap

We took a look at the current industry standard and said, "We can do better." Through dedicated engineering, we now offer you "Better" with our 4-inch x 30-foot K-FORCE Wire Hook Winch Strap with a working load limit of 6,670 Lbs. / 3,025 Kgs., which is 23 percent greater than the industry standard. As the Cargo Control People, we're always moving forward to giving you "Better" than the rest.

The strength of our Winch Strap comes from the Kinedyne K-FORCE orange with black edge 4054XW webbing that was weaved with a tight polyester thread to give you a durable strap that can handle the heavier loads with ease.

Our heat-treated carbon steel Kinedyne 1016 Narrow Hook end fitting is designed to easily slide into those harder-to-reach anchor points on your flatbed or other type of vehicle. No more struggling with bulky hooks that just pop right off once you clip them on. Our Narrow Hook slips on and stays on while you transport your cargo, working together with our webbing to keep a tight grip on your load.

All Winch Straps are labeled with the manufacturer's name and logo and the working load limit on the tags and stenciled on the straps in accordance to CVSA, WSTDA, North American Cargo Securement, CHP, and DOT regulations. Remember that equipment overload can cause severe cargo control system failure.

4" by 30' K-FORCE Wire Hook Winch Strap – 483036 Quick Specs:

• Working Load Limit: 6,670 Lbs. / 3,025 Kgs.
• Width: 4 Inches
• Length: 30 Feet
• Weight: 5.79 Lbs. / 2.6 Kgs.
• Webbing: Kinedyne K-FORCE Orange 4054XW Webbing
• End Fitting: Kinedyne 1016 Narrow Hook