Kinedyne Aluminum Deck Beam KwikLatch Release Head Assembly

Aluminum Decking Beam KwikLatch Release Head Assembly

Product Code:

80007

UPC Code:

52474018487

Have Questions?

Fill out the form below

Need to replace the head unit on your Aluminum Decking Beams? Why not upgrade with the Kinedyne KwikLatch Release Head Assembly that makes it easier to engage the beam head with the logistic track from any position.

Aluminum Decking Beam KwikLatch Release Head Assembly

Are you tired of constantly having to replace your beam head because the tab release mechanism at the top of the head keeps getting damaged? Always looking for solutions, Kinedyne has the ideal way to fix this problem. Our KwikLatch Release Head Assembly is designed to make it easier to engage the beam to the track. This is possible because the KwikLatch is located on both sides of the head instead of on the top. Because it's tucked into the head, this ergonomic finger tab reduces the risk of potential damage compared to a topside release location. Also, for added convenience, our KwikLatch is easier to operate even if you're wearing gloves, so no more stopping what you're doing to remove your gloves to insert or disengage the beam, saving you a lot of time and frustration.

Aluminum Decking Beam KwikLatch Release Head Assembly – 80007 Quick Specs:

Type of Product: Replacement Beam Head Assembly
Includes: Complete Kwik Latch Release Head Assembly
Weight: 4.11 Lbs. / 1.86 Kgs.

Specifications

Country of Origin:	China
Finish:	Zinc Plated
Color:	Gold Dichromate
PROPOSITION 65:	No
Includes:	Complete Kwik Latch Release Head Assembly
Material:	Hardened Steel
Shipping Days:	3-5
Type of product:	Replacement Beam Head Assembly
Weight (kgs):	2
UPC Code:	52474018487
Weight (lbs):	4.1
Used with (Type of Logistic Beam):	FE8000-1 FE8066-1 FE8066-3 FE8000-12 FE8066-3XL FE8000-12XL

Packaging

Skid - GTIN:	20052474018481
Skid - Standard Pack Quantity:	12
Skid - Unit Quantity:	600
Standard Pack - GTIN:	10052474018484
Standard Pack - Unit Quantity:	50
Unit Packaging:	Individually

Notices & Warnings

Warning English:	SERIES E & A BEAMS - WARNING: Series E or A beams are designed for use with Kinedyne Logistic Track. Load ratings may be reduced when used with other tracks or if the track fitting is not positively engaged. Your cargo control system is only as strong as its weakest link. Do not overload beams or create a top-heavy, unstable trailer. Do not exceed statedWorking Load Limits of Beams. Dynamic loads must be considered to avoid possible overload of system. Actual pallet load supported by the beams in a decking application must not exceed 50% of the statedWorking Load Limit to allow for dynamic loads during transit.
Warning French:	POUTRELLES DE SÉRIE E ET A - AVERTISSEMENT: Poutrelles de Série E etA sont conçus pour être utilisés avec les rails Logistique de Kinedyne. La capacité de charge peut être réduite lorsque ces raccords sont utilisés avec d’autres rails ou lorsque le raccord n’est complètement verrouillé. Votre système d’arrimage est aussi fort que son maillon le plus faible.Ne pas surcharger pas les poutrelles, ne pas mettre trop de poids en hauteur, ce qui pourrait élever le centre de gravité et rendre la remorque instable. Ne pas dépasser la capacité de charge maximale des poutrelles. Les cargaisons dynamiques doivent être considérés pour éviter le surchargement du système. Le chargement actuel des palettes supporté par les poutrelles dans une application d'empilage de peuvent pas dépasser 50% de la charge maximale de la poutrelle pour permettre les cargaisons dynamiques en route.
Warning Spanish:	ADVERTENCIA: Barras Serie E yA están diseñados para utilizarse específicamente con el riel logístico de Kinedyne. Los índices de carga pueden reducirse al utilizar otros rieles o bien, si los accesorios de los rieles no están correctamente enganchados. Considere que su sistema de control de carga es tan fuerte solo como su eslabón más débil. Las barras no deben sobrecargarse, ya que el exceso de peso en la parte superior causa la inestabilidad del remolque.No exceda la carga límite de trabajo establecida de las barras. Se deben considerar cargas dinámicas para evitar la posible sobrecarga del sistema. Carga de paleta real apoyada por las barras en una aplicación de plataforma no debe exceder el 50% de la Carga Límite de Trabajo establecida para permitir cargas dinámicas durante el tránsito.

Click on thumbnails to compare, click and drag images to reorder

Aluminum Decking Beam KwikLatch Release Head Assembly

Fill out the form below

Aluminum Decking Beam KwikLatch Release Head Assembly

Aluminum Decking Beam KwikLatch Release Head Assembly – 80007 Quick Specs: