Steel C Channel Winch Track

Steel C Channel Winch Track

What Kinedyne winch tie down system is complete without a Steel C Channel Winch Track attached to your trailer or flatbed for our Sliding Winches? Our 6-foot-long Steel C Channel Winch Track is engineered to lock Sliding Winches firmly in place when tension is applied for a reliable and smooth tie down.

To install, position the Winch Track to the underside of the side rail, which will extend past the side rail 1/4 inches to 3/8 inches. Then weld it to the vehicle's side rail with 1/4-inch fillet welds 2 inches long every 6 inches with 1/8-inch minimum penetration. Finally, weld the Winch Track to the angle iron or shims. It's that simple. Now you're ready for an effortless tie down job.

Steel C Channel Winch Track – 3606 Quick Specs:

• Width: 4.65 Inches
• Length: 6 Feet
• Weight: 38.5 Lbs. / 17.5 Kgs.
• Thickness: 1/4 Inch
• Used With: Sliding Winches
• Recommended Installation Instructions: View Instruction Manual Here